News

A bolt is a cylindrical fastener with external threads designed to be used with a nut. It consists of a head and a shank and is used for removable connections. The main classifications are as follows:‌‌ ‌By head shape‌: Hex head (most common, e.g., GB/T 5782), countersunk head (flush with the surface), round head, square head, flange head (with built-in washer for anti-loosening and load-bearing), etc.; Special shapes include T-slot bolts, swivel bolts (rotatable), and U-bolts (for securing pipe fittings). ‌By load-bearing method:‌ Standard bolts (primarily bear axial forces and allow for some displacement) and bolts for tapped holes (where the shank fits precisely into the hole to resist lateral shear forces). ‌By performance grade‌:‌ Standard bolts‌ (Grades 3.6–6.8, untreated carbon steel) and‌ high-strength bolts‌ (Grades 8.8–12.9, quenched and tempered alloy steel, used in steel structures and primary load-bearing components of machinery); stainless steel bolts are designated as A2-70 (austenitic, corrosion-resistant). By thread length: fully threaded (threads run the entire length of the shank) and partially threaded (shank has a smooth section, used for positioning or reducing stress concentration). By manufacturing precision: Grade A/B (precision-made, turned, high precision, rarely used) and Grade C (rough-made, unmachined round bar, low cost, used for temporary or tension connections). ‌By application/structure: Anchor bolts (for foundation anchoring), double-ended bolts (threaded at both ends, with one end embedded), set screws (for positioning shafts; though called “screws,” they belong to the bolt category), welded studs (one end welded, one end threaded), and expansion/chemical anchors (for post-installation anchoring in concrete). ‌By Standard System‌: Chinese National Standards (e.g., GB/T 5782 Hex Head, GB/T 1228 High-Strength Large Hex Head), American Standards (ANSI/ASTM), German Standards (DIN), Japanese Standards (JIS), etc.‌‌ High-strength bolts (Grade ≥8.8) are commonly used in bridges, tower cranes, and pressure vessels, where preload must be applied; they are classified as friction-type or bearing-type. Standard Grade C bolts are typically found in non-critical areas of buildings or for temporary fastening. Selection requires comprehensive consideration of load, environment (stainless steel or Dacromet coating required for corrosion resistance), installation space (countersunk or hex socket heads save space), and standard interchangeability.Introduction to Bolt and Fastener Products

The Fastener Industry Embraces a Wave of Smart Upgrades in 2026: JZH Fastener Technology Sets a New Benchmark for Green Manufacturing In 2026, our company officially announced the launch of its brand-new smart factory. Integrating automated production, AI-powered quality inspection, and digital supply chain management, this facility marks the company’s entry into a new era of “smart manufacturing” in the high-end fastener sector. **Key Highlights:** 1. **Full Implementation of Smart Production Lines** The new factory utilizes fully automatic cold heading machines and CNC tapping equipment imported from Germany, achieving full-process automation from raw materials to finished products. Through an Industrial Internet of Things (IIoT) system, production data is uploaded in real-time to a cloud platform, boosting production efficiency by 35% and maintaining a product合格率 of over 99.8%. 2. **Significant Achievements in Green Manufacturing** The factory is equipped with a solar photovoltaic roof and a waste heat recovery system, reducing annual carbon dioxide emissions by over 1,200 tons. The company has obtained ISO 14001 Environmental Management System certification and is committed to achieving carbon neutrality across all production lines by 2027. 3. **New Product Launch: High-Temperature-Resistant Titanium Alloy Bolt Series** Targeting the aerospace and new energy vehicle sectors, Huaxing has launched a new high-strength, corrosion-resistant titanium alloy bolt (model HT-700). This product maintains stable performance in high-temperature environments up to 600°C and features a tensile strength of 1,200 MPa, filling a gap in the domestic high-end market. 4. **Accelerated Global Market Expansion** The company has signed a five-year strategic cooperation agreement with Germany’s Bosch Group to provide customized high-strength fastening solutions for its new energy motor assemblies. Concurrently, the company’s first overseas distribution center in Southeast Asia has been launched in Bangkok, Thailand, further shortening delivery cycles for customers.   Translated with DeepL.com (free version)

 A leading Chinese fastener manufacturer has announced robust business growth, reporting annual sales reaching hundreds of millions of RMB, driven by advanced production capabilities, a fully integrated manufacturing ecosystem, and the implementation of an intelligent storage warehouse system. The company, headquartered in eastern China, specializes in the design, production, and distribution of high-quality fasteners used across diverse industries including automotive, construction, machinery, and electronics. With its own modern factory premises, dedicated production workshops, and state-of-the-art automation technologies, the company has established itself as a reliable supplier for both domestic and international markets.A key factor behind the company’s success is its newly implemented smart warehouse solution, which leverages Internet of Things (IoT) sensors, automated inventory tracking systems, and real-time data analytics to optimize stock management and streamline order fulfillment. This intelligent logistics system not only reduces operational costs but also enhances delivery accuracy and speed—critical advantages in today’s competitive global market.“Our investment in digital transformation reflects our commitment to excellence and efficiency,” said the company’s CEO. “By combining our vertically integrated production facilities with smart warehousing, we are able to deliver consistent quality, faster turnaround times, and greater flexibility to meet evolving customer demands.”With a strong focus on innovation and sustainable manufacturing practices, the company continues to expand its product portfolio and strengthen partnerships with global clients. The recent surge in annual revenue underscores growing confidence in its supply chain resilience and technological edge.Looking ahead, the company plans to further invest in research and development, explore new international markets, and enhance its green manufacturing initiatives to support long-term sustainability goals.As demand for precision fasteners rises worldwide, this forward-thinking manufacturer is well-positioned to lead the industry through innovation, reliability, and operational excellence.